SPEED-LOC™ QUICK CHANGE SYSTEM
Seeding openers to fit the Speed-Loc™ Quick Change System are available in side band or single shoot options.
The Speed-Loc™ system gives you consistent depth control, peace of mind with spring-loaded locking pins and trouble-free operation with heat-treated cast adapters.
The adapters fit a variety of machines and make it quick to change between BTT seed openers, fertilizer knives, sweeps and spikes.
Tip options include replaceable carbide and welded tips.
200-HOE-1700
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: N/A
Overview: This opener runs through the ground at a fairly vertical angle to provide less rock pulling. Provides 1-1/2″ to 1-3/4″ (38 – 44 mm) seed spread. Works best with a 1″ (25 mm) single tube seed boot.
Welded high-chrome tip included.
200-KNF-0810 / 0811
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: N/A
Overview: This low disturbance opener is low in draft and easy pulling. It is designed to work with 300-ATM-1035 of the Seed Boot System.
Welded tip with or without carbide included.
200-KNF-0813
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: N/A
Overview: The more vertical approach of this opener reduces rock pulling. It is designed to work with 300-ATM-1035 of the Seed Boot System.
Welded carbide tip included.
200-KNF-7501
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: N/A
Overview: Sharp cutting edge and extra wear life. This opener is used in conjunction with Technotill system.
Welded high-chrome tip included.
200-KNF-7511
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: Seed with Granular starter
Overview: Precise seed placement due to the funnel being close to the tip and to the bottom of the furrow. The funnel is reinforced with hard surfacing for longer wear life. The funnel fits Bourgault and Flexi-Coil square tube seed boots. Also works with the square tube seed boot.
Welded tip with or without carbide included.
200-KNF-0863
SIDE BAND OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: Liquid N
Overview: The only multi-shoot opener available for use with the Speed-Loc™ system. This unique side band opener provides good horizontal separation with a slight vertical seed/fertilizer separation.
Welded high-chrome tip included.
200-KNH-4000
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: N/A
Overview: Designed to work with 300-ATM-1035 of the Seed Boot System.
Your choice of any single shoot replaceable tips. Sold separately.
200-KNH-4010
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: N/A
Overview: This funnel is reinforced with hard surfacing for longer wear life. This opener works with the square tube seed boot of the Seed Boot System. Also fits the Bourgault or Flexi-Coil square tube seed boot.
Your choice of any single shoot replaceable tips. Sold separately.
200-SPN-0200 / 0208
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: N/A
Overview: These spoons have a 2″ (51mm) spread. Available in 1/4″ (6mm) material or 5/16″ (8mm) material for increased wear life.
200-SPN-0300 / 0308
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: N/A
Overview: These spoons have a 3″ (76mm) spread. Available in 1/4″ (6mm) material or 5/16″ (8mm) material for increased wear life.
200-VRT-1040
SINGLE SHOOT OPENER
Fits: 200 Series Speed-Loc™
Fertilizer Type: Granular
Overview: The vertical approach of this opener reduces rock pulling and soil throw.
Welded carbide tip included.
410-KNF-0801
SINGLE SHOOT OPENER
Fits: 410 Series Speed-Loc™
Fertilizer Type: N/A
Overview: This low disturbance opener is low in draft and provides easy pulling. It is designed to work with the 300-ATM-1031 of the Seed Boot System.
Welded tip with carbide included.
410-SPN-0300 / 0308
SINGLE SHOOT OPENER
Fits: 410 Series Speed-Loc™
Fertilizer Type: N/A
Overview: These spoons have a 3″ (76 mm) spread. Available in 1/4″ (6 mm) material or 5/16″ (8 mm) material for increased wear life.