SPEED-LOC™ ACCESSORIES & REPLACEMENT PARTS
NOT SURE WHAT SPEED-LOC™ ADAPTER FITS YOUR MACHINE?
Find your equipment and the adapter that’s required on the Speed-Loc™ Adapter Chart.
ASSEMBLY, INSTALLATION & REMOVAL QUESTIONS?
See the Speed-Loc™ Guide or videos for expert advice on the quick change system.
REMOVING PRODUCTS FROM THE SPEED-LOC™ ADAPTERS?
Remember to use the Speed-Loc™ Release Tool to remove openers, sweeps and spikes from the adapters.
INSTALLING PRODUCTS AND NEED A SPEED-LOC™ DRIVER?
Find the right Speed-Loc™ Driver to install your quick change products.
This 4lb (1.8kg) hammer is ideal for installing all quick change products.
The speed-release tool must be used to remove 200 and 410 Series sweeps and openers off the Speed-Loc™ adapters.
Replacement bushing for all 200 Series adapters. Comes complete with dust seal.
Replacement dust seal for all 200 and 410 Series Speed-Loc™ adapters.
Replacement locking pin for all 200 and 410 Series adapters purchased after Nov 1, 2008.
Replacement spring ball for the 200-QCA-4700 adapters.
Replacement spring ball for the 200-QCA-4710, 200-QCA-5000 and 200-QCA-5010 adapters.
Replacement spring ball for the 200-QCA-5020 adapter.
Replacement spring ball for 200-QCA-5020 adapter for special applications.
Replacement spring ball for 200-QCA-5030 adapters.
Replacement bushing for the 410-QCA-5000, 410-QCA-5010 and 410-QCA-5020. Comes complete with dust seal.
Replacement locking pin for all 410 Series adapters purchased prior to Nov 1/08. Use 200-SLC-1020 if 410 Series adapter was purchased after Nov 1/08.
Replacement spring ball for the 410-QCA-5000, 410-QCA-5010 and 410-QCA-5020.
Complete replacement package for the 410 Series, includes bushing, spring ball, pin and dust seal.
SPEED-LOC™ DRIVERS
This driver should be used for installing the following parts:
200-ASY-7523
200-KNF-0863
200-KNF-7501
200-KNF-7510
200-KNF-7511
200-KNF-7512
200-KNF-7521
200-KNF-7525
200-KNF-7531
200-KNF-7542
This driver is used when installing the 200-HOE-1700 onto the adapter.
This driver should be used when installing knives with the following tips:
200-TIP-2011
200-TIP-3000
200-TIP-3001
200-TIP-3011
200-TIP-4011
When used on:
200-KNH-4000
200-KNH-4010
200-KNH-4020
This driver should be used when installing knives with tips 200-TIP-1011.
This driver is used when installing any of the quick change sweeps and spoons.
This driver should be used when installing these knives and parts:
200-KNF-0800
200-KNF-0801
200-KNF-0810
200-KNF-0811
200-KNF-0813
200-KNF-7560
200-KNH-7551
410-KNF-0801
410-KNF-0825
410-KNF-0826
410-KNF-0831
410-KNF-7551
410-KNF-7553
410-KNF-7560
410-KNH-7524
410-KNH-7526
410-KNH-7540
410-ASY-0823
410-ASY-7523
This driver should be used when installing these tips:
200-TIP-0511
200-TIP-0801
200-TIP-0802
200-TIP-0803
200-TIP-0811
Onto these knives:
200-KNH-4000
200-KNH-4010
200-KNH-4020