What’s in a sweep? Most cultivator sweeps on the market today are made with very comparable material. If the material used doesn’t set the sweep apart, then what makes the difference in the life and quality of a cultivator sweep?
- Precise Heat Treatment • Long-Lasting Design • Consistent Quality • Innovative Speed-Loc™ Technology
- 4`` (100 mm)
- 6`` (150 mm)
- 8`` (200 mm)
- 10`` (254 mm)
- 12`` (305 mm)
- 14`` (355 mm)
- 16`` (406 mm)
- 18`` (457 mm)
410-PWV-0400
Fits: 410 Series Speed-Loc™
Size: 4″ (100mm)
Thickness: 1/4″ (6 mm)
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
410-PWV-0600 & 410-PWV-0608
Fits: 410 Series Speed-Loc™
Size: 6″ (150mm)
Thickness: This cultivator sweep is available in two thicknesses:
- 1/4″ (6mm) 410-PWV-0600
- 5/16″ (8mm) 410-PWV-0608
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
410-PWV-0800 & 410-PWV-0808
Fits: 410 Series Speed-Loc™
Size: 8″ (200mm)
Thickness: This sweep is available in two thicknesses:
- 1/4″ (6mm) 410-PWV-0800
- 5/16″ (8mm) 410-PWV-0808
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
410-PWV-1000 & 410-PWV-1008
Fits: 410 Series Speed-Loc™
Size: 10″ (254mm)
Thickness: This sweep is available in two thicknesses:
- 1/4″ (6mm) 410-PWV-1000
- 5/16″ (8mm) 410-PWV-1008
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
410-PWV-1200 & 410-PWV-1208
Fits: 410 Series Speed-Loc™
Size: 12″ (305mm)
Thickness: This sweep is available in two thicknesses:
- 1/4″ (6mm) 410-PWV-1200
- 5/16″ (8mm) 410-PWV-1208
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
410-PWV-1400 & 410-PWV-1408
Fits: 410 Series Speed-Loc™
Size: 14″ (355mm)
Thickness: This sweep is available in two thicknesses:
- 1/4″ (6mm) 410-PWV-1400
- 5/16″ (8mm) 410-PWV-1408
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
410-PWV-1600 & 410-PWV-1608
Fits: 410 Series Speed-Loc™
Size: 16″ (406mm)
Thickness: This sweep is available in two thicknesses:
- 1/4″ (6mm) 410-PWV-1600
- 5/16″ (8mm) 410-PWV-1608
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
410-PWV-1808
Fits: 410 Series Speed-Loc™
Size: 18″ (457mm)
Thickness: This sweep is available in two thicknesses:
- 1/4″ (6mm) 410-PWV-1800
- 5/16″ (8mm) 410-PWV-1808
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.