fbpx
skip to Main Content

200 SERIES SWEEPS

What’s in a sweep? Most cultivator sweeps on the market today are made with very comparable material. If the material used doesn’t set the sweep apart, then what makes the difference in the life and quality of a cultivator sweep?

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Fits: 200 Series Speed-Loc™

Size: 4″ (100mm)

Thickness: 1/4″ (6mm)

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-0500 & 200-PWV-0508

Fits: 200 Series Speed-Loc™

Size: 5″ (140mm)

Thickness: Available in two thicknesses.

  • 1/4″ (6mm) 200-PWV-0500
  • 5/16″ (8mm) 200-PWV-0508

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-0700 & 200-PWV-0708

Fits: 200 Series Speed-Loc™

Size: 7″ (180mm)

Thickness: Available in two thicknesses.

  • 1/4″ (6mm) 200-PWV-0700
  • 5/16″ (8mm) 200-PWV-0708

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-0900 & 200-PWV-0908

Fits: 200 Series Speed-Loc™

Size: 9″ (230mm)

Thickness: Available in two thicknesses.

  • 1/4″ (6mm) 200-PWV-0900
  • 5/16″ (8mm) 200-PWV-0908

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-1000 & 200-PWV-1008

Fits: 200 Series Speed-Loc™

Size: 10″ (254mm)

Thickness: Available in two thicknesses.

  • 1/4″ (6mm) 200-PWV-1000
  • 5/16″ (8mm) 200-PWV-1008

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-1100 & 200-PWV-1108

Fits: 200 Series Speed-Loc™

Size: 11″ (280mm)

Thickness: Available in two thicknesses.

  • 1/4″ (6mm) 200-PWV-1100
  • 5/16″ (8mm) 200-PWV-1108

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-1200 & 200-PWV-1208

Fits: 200 Series Speed-Loc™

Size: 12″ (305mm)

Thickness: Available in two thicknesses.

  • 1/4″ (6mm) 200-PWV-1200
  • 5/16″ (8mm) 200-PWV-1208

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-1300 & 200-PWV-1308

Fits: 200 Series Speed-Loc™

Size: 13″ (330mm)

Thickness: Available in two thicknesses.

  • 1/4″ (6mm) 200-PWV-1300
  • 5/16″ (8mm) 200-PWV-1308

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-1400 & 200-PWV-1408

Fits: 200 Series Speed-Loc™

Size: 14″ (355mm)

Thickness: Available in two thicknesses.

  • 1/4″ (6mm) 200-PWV-1400
  • 5/16″ (8mm) 200-PWV-1408

Installation Driver: 400-DRV-1000

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-1608

Fits: 200 Series Speed-Loc™

Size: 16″ (406mm)

Thickness: 5/16″ (8mm)

Installation Driver: 400-DRV-1000

Note: This sweep is only available in 5/16″ (8mm) thickness and was developed for Western Europe. It is not recommended for most North American field conditions and should only be used domestically when there are no rocks present. Available in North America by special order only.

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

200-PWV-1808

Fits: 200 Series Speed-Loc™

Size: 18″ (457mm)

Thickness: 5/16″ (8mm)

Installation Driver: 400-DRV-1000

NOTE: This sweep is only available in 5/16″ (8mm) thickness and was developed for Western Europe. It is not recommended for most North American field conditions and should only be used domestically when there are no rocks present. Available in North America by special order only.

The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

Back To Top